Radium: Top Feed Fuel Rail Conversion Kit, Nissan SR20DET (S14/S15)

This Nissan Silvia fuel rail kit is specifically designed for SR20DET S14/S15 OEM intake manifold. It features a large 0.69" internal diameter bore to suit even the most fuel hungry engines. The rail is CNC machined from solid 6061 aluminum and black anodized for a high quality surface finish. The included hardware mounts the fuel rail to the OEM intake manifold bosses. The Radium fuel rail converts the OEM side feed fuel injector setup to top feed, allowing the use of high flow fuel injectors (not included). The fuel injector bores are 14mm ID. The kit is designed for specific upper and lower O-ring spacing, as depicted.



Below are some of the many fuel injectors that are a direct fitment with this Radium fuel rail kit:

Injector Dynamics ID850-34-14-14
Injector Dynamics ID1050x-34-14-14
Injector Dynamics ID1300-34-14-14
Injector Dynamics ID1700-34-14-14
Injector Dynamics ID2000-34-14-14

To resist oxidation corrosion, the lower billet aluminum injector seats are anodized and laser etched. They are O-ring sealed and designed for 14mm top feed injectors. This kit is compatible with all fuel types including popular alcohol mixtures such as E85.

The OEM 2-bolt IACV bypass hard line is replaced by a billet aluminium IACV spacer kit to gain clearance for the top feed fuel rail. An anodized aluminium barb adapter and rubber hose is supplied to reroute the charge pipe hose externally to the manifold. One gasket is included for the IACV spacer.

INCLUDED:
All parts listed below are included for a trouble and leak-free installation.

-Black Anodized Aluminum Fuel Rail
-Green Anodized Aluminum Mounting Bolt Spacers (x3)
-Radium 20-0161, Green Anodized Aluminum 25mm Injector Seats (x4)
-Radium 20-0162, Black Anodized Aluminum IACV Spacer Kit
-Radium 18-0014, IACV Gasket, SR20DET S14/S15 (x1)
-Black Anodized Aluminum IACV Barb Adapter
-Rubber Hose and OEM Clamp for IACV
-Stainless Steel M8x1.25 Mounting Bolts (x3)
-Stainless Steel M6x1 Mounting Bolts (x3)

Note: This fuel rail kit does NOT come standard with fittings (see port configurations below).

PORT CONFIGURATIONS:
Use the optional check boxes above and the diagram below to select the appropriate port configuration for your specific application. If you are going to use your own fittings, simply do not check any boxes.



NOTE: If a gauge or sensor is required for monitoring fuel pressure, use this -6AN inline adapter HERE. It requires a -6AN male adapter to be used on the front or rear port. This Radium Engineering fuel pressure gauge HERE can be used with this -6AN inline adapter fitting.

Do I need a pulse damper?
The opening and closing of the injectors creates pressure pulses in the fuel rail, which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a pulse damper should be used (especially with high flow injectors). The internal diaphragm will absorb oscillation pulses and stabilize fuel pressure. This correction can be measured throughout the RPM range and can often help an erratic surging idle. The fuel pulse damper can be used in either 3/8" NPT port.

For Nissan SR20DET (S14/S15). Please select from the options on the right.

Stock images used. Actual product may vary.