ID: 2000 Injector Kit For Honda (Acura), Infiniti, Nissan, Toyota
The ID2000 has set the standard for linearity and control in a large injector. Flowing in excess of 2000cc/min at 3 bar, the ID2000 will also provide a smooth stoichiometric idle on E85, and it will do all this while maintaining strict linearity up to 95% duty cycle at 9000rpm.
With a pressure capability of 9 bar this injector can flow as much as 3700cc/min with excellent low pulsewidth linearity, and has the broadest operating range of any injector on the market.
Basic Specifications
Nominal Flow Rate -2225cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 9.0 Bar (130.5 psi)
Fuel Compatibility - Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels. Incompatible with MTBE/Nitro Methane/Nitro Propane.
Electrical Connector - Denso
Plug & Play
The Plug & Play kit is available for the following vehicles with this injector kit:
- 91.5-4 - Honda (Acura) Accord 92-95, Honda (Acura) Civic 88-95, Honda (Acura) Prelude 92-96, Honda (Acura) Integra 90-95, Toyota MR-2 Turbo (90-96) 3S-GTE (11mm)
- 91.6-4 - Honda (Acura) Accord 96-02, Honda (Acura) Civic 96-00, Honda (Acura) Prelude 97-01, Honda (Acura) Integra 96-01
This kit fits the following vehicle models:
- Honda Accord 92-95
- Honda Accord 96-02
- Honda Civic 88-95
- Honda Civic 96-00
- Honda Prelude 92-96
- Honda Prelude 97-01
- Honda Integra 90-95
- Honda Integra 96-01
- Infiniti G20 91-96 (11mm)
- Infiniti G20 99-02 (11mm)
- Nissan 240SX-S13/S14/S15 (11mm)
- Nissan SR20DET FWD (11mm)
- Toyota MR-2 Turbo (90-96) 3S-GTE (11mm)
- Toyota Celica All-Trac (89-99) 3S-GTE (11mm)
Stock images used. Actual product may vary.